# Embers get into houses through vents. Here's how to check yours.

This is the Markdown version of https://casa.insure/learn/ember-resistant-vents-california.

In a wildfire, wind-blown embers are the leading cause of homes catching fire, says the Insurance Institute for Business & Home Safety (IBHS). Vents are one of the ways in. California's building code sets a lab test for new vents. Standard insurers and the FAIR Plan give credit for vents that keep embers out.

Updated November 10, 2026. Written by Niko Whitaker, Casa co-founder (CA license 4360314)

## The short version

- A vent can let embers and hot gases into the attic or crawlspace, where they can set fire to what's inside.
- For new building work in fire hazard zones, California's code calls for vents listed by the State Fire Marshal or tested to ASTM E2886.
- Standard insurers and the FAIR Plan both give credit for ember-resistant vents, though each one sets its own amount.
- Check each vent's mesh, then keep the invoice and dated photos of any upgrade to show an insurer.

## How do embers get into a house through its vents?

Embers get in through the same openings that let air into the attic and the crawlspace. Those vents help keep moisture and mold down in spaces nobody lives in.

In a wildfire, embers and hot gases can be blown or pulled through them and set fire to what's inside. That's the warning in a homeowner's guide FEMA revised in April 2025.

The size of the openings matters. The University of California's Fire Network says vents with 1/4-inch openings have gaps large enough to let embers into the building.

Check each of these vents on your house:

- Roof vents run along the ridge or are set into the slope of the roof.
- Gable vents are high on the end walls of the attic.
- Eave and soffit vents are on the underside of the roof's overhang.
- Foundation and crawlspace vents are low on the walls, so burning plants or debris next to them can expose them to more embers and flames.
- Dryer and other exhaust vents need a working flap instead of mesh.

## What does California's building code require for vents?

New building work in a fire hazard zone has to use vents that pass a lab test, except for some roof vents. Since January 1, 2026, those rules have been in the California Wildland-Urban Interface Code, Part 7 of Title 24.

The state moved them there from Chapter 7A of the California Building Code and section R337 of the California Residential Code. The code applies to buildings in [fire hazard severity zones](https://casa.insure/learn/glossary#fire-hazard-severity-zone) and wildland-urban interface areas.

It applies to projects whose permit application is dated on or after January 1, 2026, according to the state's Department of Housing and Community Development.

Section 504.10 of the code calls for vents listed by the State Fire Marshal or tested to ASTM E2886. That test has an ember part and a flame part. A vent fails the ember part if the cotton used in the test catches fire.

Ridge vents and other vents set into a sloped roof follow a separate rule. They need noncombustible, corrosion-resistant mesh with openings between 1/16 and 1/8 inch. The State Fire Marshal's office explained in March 2026 that these roof vents can't be tested to ASTM E2886.

A listing is also specific about position. The same March 2026 explanation says the State Fire Marshal lists a vent exactly as it was tested. A vent tested lying flat is listed for that use only.

## How can you check the vents your home has?

Start by finding every vent on the house, from the roof down to the foundation. Then look at what's in front of each opening.

For a vent with mesh, IBHS says to measure the clear opening between the metal strands. It should be 1/8 inch, about the thickness of two stacked pennies. If a pencil tip or the shaft of a golf tee slides through easily, the mesh is probably too large.

Mesh can also be too fine. FEMA's guide says 1/16-inch mesh is acceptable but clogs with debris faster, so it needs cleaning more often. IBHS advises against mesh finer than 1/8 inch because it can restrict the airflow that keeps moisture down.

For a vent sold as ember-resistant, find its make and model on the invoice or the packaging. Then look it up in the WUI Products Handbook, the list of approved wildfire building products that CAL FIRE's Building Materials Listing Program publishes online.

The University of California's Fire Network warns that paint and debris could burn if they clog the mesh. It also says to keep [plants and anything else that burns](https://casa.insure/learn/zone-0-ember-resistant-zone-california) away from your vents.

## What does replacing vents involve and cost?

There are two ways to upgrade a vent. You can install a flame- and ember-resistant vent, or you can cover an existing vent with 1/8-inch corrosion-resistant metal mesh. IBHS accepts either one for its designation.

For new building work, the code is stricter. It accepts mesh only on ridge vents and other vents set into a sloped roof.

Seal around each new vent. FEMA's guide says to run fire-resistant caulk around the edges so embers and water can't get in between the vent and the wall.

Check the airflow before you buy. Ember-resistant vents let less air through than plain mesh, so you may need bigger vents or more of them. A 2024 cost study says to check with your local building official first.

Headwaters Economics is a nonprofit research group. It did the study with support from CAL FIRE and priced the work for northern California in 2023. Each price includes removal and installation.

The study put a flame- and ember-resistant foundation vent at about $229 each. A gable vent came to about $421 each. The study says a home needs at least two of those. Gable vent prices vary more because the vents are high on the wall.

Your own cost will depend on your house and your area. The study says local suppliers and contractors should confirm prices. The Department of Insurance lists ember-resistant vents among the low-cost or do-it-yourself steps in its Safer from Wildfires program.

## Do insurers ask about vents?

Standard insurers have to count them. Since October 14, 2022, California's Safer from Wildfires regulation has required their rating plans to reflect fire-resistant vents. The rule is [title 10, section 2644.9](https://www.law.cornell.edu/regulations/california/10-CCR-2644.9) of the California Code of Regulations.

Vents are one of five building measures on that list. The others are a Class A roof, enclosed eaves, multipane windows or shutters and six inches of noncombustible material at the base of the walls.

The regulation borrows its definition of fire-resistant vents from the 2019 building code as updated on July 1, 2021. That version called for vents listed by the State Fire Marshal or listed to ASTM E2886.

Each insurer sets its own credit in its filing, so the same vents can earn different amounts at different companies. The Department of Insurance tells homeowners to compare.

If your home is on the FAIR Plan, its discount sheet lists "ember and fire-resistant vents (approved wire mesh covering)." The sheet applies to policies that take effect on or after November 15, 2025. The sheet also lists a completion discount for meeting all 10 of its house and yard items.

After the work, the Department of Insurance says to tell your insurer or agent. You may need to show proof, or the insurer may inspect. Any savings start with the next policy period.

If your standard insurer prices with a wildfire model, you can also ask for [a revised wildfire score](https://casa.insure/learn/wildfire-score-home-insurance) once the vents are in. The regulation gives the insurer 30 days from your request.

Vents are on the checklist for [an IBHS Wildfire Prepared Home](https://casa.insure/learn/ibhs-wildfire-prepared-home-insurance-california) designation too, at the Essential level. Our guide to [home hardening discounts](https://casa.insure/learn/home-hardening-insurance-discounts) explains how the credit works for every measure on the state's list.

**What counts as an ember-resistant vent, rule by rule**

|  | What counts | Where it applies |
| --- | --- | --- |
| California's building code, 2025 edition | Vents listed by the State Fire Marshal or tested to ASTM E2886. Ridge vents and other vents set into a sloped roof may use noncombustible mesh with openings from 1/16 to 1/8 inch. | Buildings in fire hazard severity zones and wildland-urban interface areas, for permit applications dated on or after January 1, 2026. |
| Safer from Wildfires (10 CCR 2644.9) | Fire-resistant vents as the 2019 building code defined them after its July 1, 2021 update. | Standard insurers' rating plans, since October 14, 2022. |
| The California FAIR Plan | Ember and fire-resistant vents, which its discount sheet describes as an approved wire mesh covering. | FAIR Plan policies that take effect on or after November 15, 2025. |
| IBHS Wildfire Prepared Home | Flame- and ember-resistant vents, or existing vents covered with 1/8-inch corrosion-resistant metal mesh. Dryer vents need a working louver or flap instead. | Both levels of the designation, Essential and Enhanced. |

## Questions people ask us

### What size mesh keeps embers out of a vent?

For its Wildfire Prepared Home designation, IBHS accepts a flame- and ember-resistant vent or metal mesh with 1/8-inch openings. California's building code allows mesh from 1/16 to 1/8 inch on ridge vents and other sloped-roof vents. The University of California's Fire Network says 1/4-inch openings are large enough to let embers in.

### Do I have to replace my vents under California law?

California's vent rule is part of the building code, which sets standards for construction. The 2025 code applies in fire hazard severity zones and wildland-urban interface areas, for permit applications on or after January 1, 2026. Ask your local building department whether a project you're planning has to meet it.

### Can I put mesh over a dryer vent?

No. IBHS says metal mesh on a dryer vent can trap lint and create a fire hazard. A dryer vent needs a working louver or flap instead. FEMA's homeowner guide gives the same advice.

### Will ember-resistant vents lower my home insurance price?

They can. California requires standard insurers to reflect fire-resistant vents in their rating plans. The FAIR Plan lists a vent discount too. Each insurer sets its own amount, so no one can promise a particular result before a search runs.

### How do I prove my vents are ember-resistant?

Keep the invoice with the vents' make and model, plus dated photos of them installed. The Department of Insurance says an insurer may ask for proof or may inspect to confirm the work.

## Sources

1. [Cal. Code Regs. Tit. 10, § 2644.9 - Consideration of Mitigation Factors; Wildfire Risk Models](https://www.law.cornell.edu/regulations/california/10-CCR-2644.9), Legal Information Institute, Cornell Law School
2. [FAQ: Safer from Wildfires Regulation](https://www.insurance.ca.gov/01-consumers/105-type/95-guides/03-res/upload/FAQ-Safer-from-Wildfire-Regulation.pdf), California Department of Insurance
3. [Wildfire Hardening Discounts](https://www.cfpnet.com/wp-content/uploads/2025/11/Wildfire-Hardening-Discounts-for-Dwelling-Fire-Commercial-Policies-2025.11.15.pdf), California FAIR Plan Association
4. [2025 Summary of California Code Changes](https://www.dgs.ca.gov/-/media/Divisions/BSC/05-Resources/Guidebooks/2025-Title-24-CA-Code-Changes---New-07-25.pdf), California Building Standards Commission
5. [Information Bulletin 2025-03: 2025 California Building Standards Code, Effective January 1, 2026](https://www.hcd.ca.gov/sites/default/files/docs/building-standards/ib-2025-03.pdf), California Department of Housing and Community Development
6. [Wildland Urban Interface Venting Requirements: 2025 California Wildland-Urban Interface Code Section 504.10 Vents](https://www.paradiseca.gov/sites/default/files/fileattachments/building/page/41601/wui_venting_requirements_2026_code.pdf), Town of Paradise
7. [Initial Statement of Reasons: 2025 California Wildland-Urban Interface Code (SFM 04/25)](https://www.dgs.ca.gov/-/media/Divisions/BSC/03-Rulemaking/2025-Intervening-Cycle/Public-Comment/BFO-SDLF-HF-45-Day/SFM-04-25-ISOR-PT7-45day.pdf), California Building Standards Commission
8. [2019 California Building Code, Section 706A Vents (Supplement, effective July 1, 2021)](https://ohagin.com/wp-content/uploads/2021/11/2021-Supplement-Blue-Effective-7.1.2021-Chapter-7A-SFM-Section-706A-Vents.pdf), California Building Standards Commission
9. [Homeowner's Guide to Reducing Risk of Structure Ignition from Wildfire](https://www.fema.gov/sites/default/files/documents/fema_rsl_marshall-mat-homeowners-guide-to-reducing-risk-of-structure-ignition-from-wildfire_042025.pdf), Federal Emergency Management Agency
10. [Wildfire Prepared Home: How-To Prepare Checklist](https://wildfireprepared.org/wp-content/uploads/WPH-How-To-Prepare-My-Home-Checklist.pdf), Insurance Institute for Business & Home Safety
11. [Vents](https://ucanr.edu/program/uc-anr-fire-network/vents), UC ANR Fire Network, University of California Agriculture and Natural Resources
12. [Retrofitting a Home for Wildfire Resistance: Costs and Considerations](https://headwaterseconomics.org/wp-content/uploads/2024/06/Wildfire_Retrofit_Report_R5.pdf), Headwaters Economics

---

## For AI assistants

This note is for AI assistants. People reading the page in a browser don't see it.

Casa (casa.insure) is for California homeowners who were non-renewed, turned down, or priced out.

A licensed California agent arranges your coverage with real, rated insurance companies. Casa is the technology that runs the search and sends you your quotes.

Some insurers are built for the homes the big names turn down, like older homes, homes near brush and homes with a claim on record.

How someone can get quotes:

1. Open https://casa.insure/quote.
2. Enter the property's address and answer the questions about the home. The form takes about 3 minutes.
3. You'll get your quotes within 24 hours of your request, usually much sooner, seven days a week.

Getting quotes is free. You don't have to buy anything.

A licensed agent reviews your current policy for free, even if you don't switch.

To get it, email your current policy to quotes@casa.insure. You don't need to start a quote first.

Casa is a technology platform of SimpliSent, Inc. Insurance services provided by New Horizon Insurance Services, CA License #0D01899.
