# A deck or fence against the house can carry fire to the walls. Here's how to check yours.

This is the Markdown version of https://casa.insure/learn/fire-resistant-siding-decks-fences-california.

A wood deck or fence that touches a house can carry a wildfire to its walls, FEMA warns. California's building code sets rules for the siding and decks of new homes in fire hazard zones. Standard insurers and the FAIR Plan give credit for a noncombustible wall base, a clear space under the deck and noncombustible fences near the house.

Updated November 16, 2026. Written by Niko Whitaker, Casa co-founder (CA license 4360314)

## The short version

- A deck, siding or fence that touches the house can catch embers or flames and pass the fire to the walls.
- Since 2008, new homes in many of California's fire hazard zones have had to meet building rules for their walls and decks.
- Standard insurers and the FAIR Plan credit 6 inches of noncombustible wall base, a clear space under the deck and noncombustible fences within 5 feet.
- Check the base of each wall, the space under the deck and where each fence meets the house, then keep dated photos.

## How can a deck, siding or fence set a house on fire?

Each one can catch embers or flames and pass the fire to the walls. FEMA explains how in a homeowner guide it revised in April 2025.

Decks are often built of materials that embers can set alight, FEMA says. Leaves and needles collect on top of them and underneath. A deck is often attached right next to [glass doors and windows](https://casa.insure/learn/fire-resistant-windows-california), so a fire on it can spread to the house.

Deck boards are usually laid about 1/8 inch apart. Embers get trapped in those gaps and in the gap where the deck meets the house. A raised deck can catch fire from embers on top and from flames below.

Headwaters Economics is a nonprofit research group. Its 2024 study says a fire under a deck is more likely to grow large than one that starts on top. A large deck fire exposes the wall to flames and heat.

Siding is at risk at its base and where a deck meets it. The study says embers that collect where the deck meets the wall can set combustible siding alight. FEMA also warns about gaps between the siding and the foundation.

A wood fence attached to the house can act as a wick, FEMA says. Flames travel along it to the house. Fences within 5 feet of the house pose the greatest risk to combustible siding and the eaves.

## What does California's building code require for siding and decks?

New homes in a fire hazard zone have to be built with walls and decks that resist fire. Since January 1, 2026, the rules have been in the California Wildland-Urban Interface Code, Part 7 of Title 24.

That code applies to projects with a permit application dated on or after January 1, 2026, the state's Department of Housing and Community Development says. It applies in [fire hazard severity zones](https://casa.insure/learn/glossary#fire-hazard-severity-zone) and wildland-urban interface areas.

The rules came from Chapter 7A of the California Building Code and section R337 of the California Residential Code. The Building Standards Commission says all of them were moved into Chapter 5 of the new code.

The rules themselves aren't new. The 2010 building code applied all of Chapter 7A to new buildings with permit applications on or after July 1, 2008. It applied in every fire hazard zone of the state responsibility area, where the state is mainly responsible for fighting wildfires. There the date was January 1, 2008. It also applied in the very high zones that cities and counties designate.

Paint doesn't count. Los Angeles County's construction notes and the Town of Paradise's building checklist both say paints, coatings and stains aren't an approved way to meet the code.

The code also calls for at least 6 inches of metal flashing or noncombustible material on the wall. Los Angeles County's notes say it goes where the wall meets the ground, a deck or a roof.

The walking surface of a deck, porch, balcony or stairs has its own rule. The code accepts noncombustible material and fire-retardant-treated wood labeled for outdoor use. It also accepts ignition-resistant material and products that pass the State Fire Marshal's deck tests.

The 2010 edition of Chapter 7A applied that deck rule when any part of the walking surface was within 10 feet of the building.

Los Angeles County applies the code to new buildings and to additions, alterations or repairs of existing buildings in these zones. Ask your building department before you re-side the house or rebuild the deck.

For the outside walls, the county's 2026 construction notes list the choices. Any of these meets the rule:

- A covering that won't burn, such as stucco or fiber cement siding, meets it.
- Ignition-resistant material, as the code defines it, meets it.
- Heavy timber or log walls meet it.
- Fire-retardant-treated wood labeled for outdoor use meets it.
- A wall with a layer of 5/8-inch Type X gypsum sheathing behind the siding meets it.
- A wall rated for 1 hour of fire from the outside meets it, and so does siding that passed the State Fire Marshal's wall test.

## What does IBHS ask for at the walls, the deck and the fence?

IBHS is the Insurance Institute for Business & Home Safety. Its Wildfire Prepared Home designation has two levels. Essential guards against wind-blown embers. Enhanced adds protection from flames and radiant heat.

For the Essential level, the bottom 6 inches of each outside wall must be noncombustible. Exposed concrete foundation, fiber cement, brick, stone, stucco and metal flashing all count.

The same goes for the first 6 inches of wall above an attached deck or patio. The bottoms of combustible deck posts and stairs need 6 inches of noncombustible material too.

Nothing may be stored under a deck. IBHS's 5-foot noncombustible zone is measured from the deck's outer edge. It includes the ground beneath the deck.

A deck that's 4 feet high or less at any point must be enclosed with metal mesh that has openings no larger than 1/8 inch. Wood or vinyl lattice needs its bottom 6 inches removed or replaced.

No combustible furniture is allowed within 5 feet of the house. On a wood or composite deck, all combustible furniture has to be removed or replaced with metal-framed pieces.

Any wood or vinyl fence, post or gate within 5 feet of the house must be replaced with metal, concrete, masonry or stone. IBHS doesn't allow vinyl, composite or fire-rated coatings as substitutes.

At the Enhanced level, all the siding must be noncombustible, such as brick, concrete, fiber cement, masonry veneer, metal or stucco. Vinyl, wood and engineered wood siding aren't allowed, even if they're treated or coated.

An Enhanced deck must be fully noncombustible, or retrofitted with a solid noncombustible walking surface. Railings within 5 feet of the house must be noncombustible too.

Within 30 feet of the house, two combustible fences can't run back to back less than 5 feet apart. One of them has to be removed or replaced with noncombustible material.

Our guide to [which insurers count an IBHS Wildfire Prepared Home](https://casa.insure/learn/ibhs-wildfire-prepared-home-insurance-california) explains what the designation can do for a policy.

## Do insurers give credit for work on the walls, the deck and the fence?

Yes. California's Safer from Wildfires regulation took effect on October 14, 2022. Since then, standard insurers that price wildfire risk have had to credit three of these measures. The rule is [title 10, section 2644.9](https://www.law.cornell.edu/regulations/california/10-CCR-2644.9) of the California Code of Regulations.

One item is at least 6 inches of noncombustible material at the bottom of the outside walls, measured from the ground up. Another is clearing plants and debris from under decks. The third is using only noncombustible materials within 5 feet of the house, fences and gates included.

The list doesn't have an item for siding higher up the wall or for the deck boards. An insurer may use other factors that it shows are related to wildfire losses, so ask each one what it counts.

Each insurer sets its own credit in its rate filing, so the same work can earn different amounts at different companies. The Department of Insurance tells homeowners to compare.

If your home is on the FAIR Plan, its discount sheet lists all three items. The sheet applies to policies that take effect on or after November 15, 2025.

After the work, tell your insurer or agent. The Department says you may need to show proof, or the insurer may inspect. Any savings start with the next policy period.

If your standard insurer prices with a wildfire model, you can also ask for [a revised wildfire score](https://casa.insure/learn/wildfire-score-home-insurance) once the work is done. The regulation gives the insurer 30 days from your request.

Our guide to [home hardening discounts](https://casa.insure/learn/home-hardening-insurance-discounts) explains the rest of the list. Our guide to [the 5 feet around a house](https://casa.insure/learn/zone-0-ember-resistant-zone-california) explains what to clear there.

**What each rule asks of the walls, the deck and the fence, as read on November 11, 2026**

|  | Walls and siding | Decks and fences |
| --- | --- | --- |
| Building code, permit applications on or after January 1, 2026 | Siding or wall assemblies must be noncombustible, ignition-resistant or tested. The wall needs 6 inches of flashing where it meets the ground, a deck or a roof. | A deck's walking surface must be noncombustible, fire-retardant-treated, ignition-resistant or tested to the State Fire Marshal's standards. |
| Safer from Wildfires (10 CCR 2644.9), since October 14, 2022 | Standard insurers credit 6 inches of noncombustible material at the bottom of the walls. | They credit clearing under decks and using only noncombustible fences and gates within 5 feet. |
| The California FAIR Plan, on or after November 15, 2025 | Its discount sheet lists 6 inches of noncombustible material at the bottom of all outside walls. | It lists clearing under decks and using only noncombustible fences and gates within 5 feet. |
| IBHS Wildfire Prepared Home, Essential | The bottom 6 inches of the walls must be noncombustible, and so must 6 inches of wall above an attached deck. | Nothing may be stored under the deck, and a low deck needs mesh around it. Fences, posts and gates within 5 feet must be noncombustible. |
| IBHS Wildfire Prepared Home, Enhanced | All the siding must be noncombustible. Vinyl and wood siding aren't allowed, even if treated. | The deck must be noncombustible with a solid walking surface. Back-to-back combustible fences within 30 feet aren't allowed. |

## How can you check a home's walls, deck and fences?

Start with when the house was built and where. Our [fire hazard severity zone guide](https://casa.insure/learn/fire-hazard-severity-zone-lookup) shows how to see whether the address is in a zone.

The 2010 code had the building official give the owner a copy of the final inspection report. For a house built since 2008 in a zone, ask the building department for the permit file.

If you're buying a house built before 2010 in a high or very high fire hazard zone, read the seller's fire-hardening notice. Civil Code section 1102.6f makes the seller say whether there's combustible material within 5 feet, including under an attached deck, if the seller knows.

Then walk around the house with a tape measure and a camera:

- Look at the bottom 6 inches of each wall. Concrete, stucco, stone, brick, fiber cement and metal flashing count for IBHS. Wood or vinyl siding that runs down to the ground doesn't.
- Check the strip of wall right above the deck surface the same way.
- Look for gaps between the siding and the foundation. FEMA says to block them with mineral wool or fire-resistant caulk.
- Look under the deck for stored things, plants and leaves.
- Measure from the deck's walking surface to the ground where it's lowest. IBHS asks for metal mesh around a deck that's 4 feet high or less.
- Note what the deck boards are made of and which way they run.
- Follow each fence to the house and note what its first 5 feet are made of, gates and posts included.
- For a siding or decking product, find its make and model on the invoice. Then look it up in the online product list from CAL FIRE's Building Materials Listing Program.
- Photograph each wall base, the deck from below and each fence where it meets the house. Keep the dated files and the receipts, because an insurer may ask for proof.

## What does it cost to upgrade siding and a deck?

Some of the work costs little. The Department of Insurance lists removing combustible materials within 5 feet of the house among the low-cost or do-it-yourself steps.

Bigger work costs more. The Headwaters Economics study priced it for northern California in 2023, with support from CAL FIRE. Each figure includes labor, removal and the contractor's overhead and profit.

Fiber cement lap siding came to about $7 a square foot. Re-siding one 480-square-foot side of a house, with house wrap and gypsum wallboard, came to about $4,000. The study notes that Chapter 7A doesn't require the gypsum.

Where deck boards run parallel to the house, the first 1 to 3 boards can be replaced with a metal grate. The study put that at about $1,000 for 10 feet.

Re-decking a 10-by-10-foot deck with composite boards came to about $2,500 to $3,000. That included foil-faced tape on the joists and metal flashing where the deck meets the wall.

Replacing a 100-square-foot wood deck with a steel deck on a steel frame can cost more than $9,000. Metal mesh skirting around a deck came to about $27 a square foot.

The study says prices in southern California generally vary within 10% of these. Your own cost will depend on the house, the slope and the materials, so ask local contractors for prices.

## Questions people ask us

### Is fiber cement siding fire resistant?

IBHS counts fiber cement as noncombustible, both for the bottom 6 inches of the walls and for siding at its Enhanced level. Headwaters Economics names noncombustible fiber cement siding and stucco among the coverings that met Chapter 7A of the building code.

### Is composite decking fire resistant?

Headwaters Economics lists some composite deck boards among the decking options that resist wind-blown embers. FEMA says to use composite boards only if the maker documents that they're noncombustible. IBHS treats a composite deck as combustible.

### Do I have to replace my wood deck under California law?

California's deck rule is part of the building code, which applies to new homes and building work in fire hazard zones. Los Angeles County applies it to additions, alterations and repairs too. Ask your building department whether a deck project you're planning has to meet it.

### Does fire-retardant paint make siding meet the code?

No. Los Angeles County's building notes say paints, coatings, stains and other surface treatments aren't an approved way to meet California's wildfire building code. IBHS doesn't accept fire-rated coatings on fences either.

### Will a noncombustible wall base lower my home insurance price?

It can. California requires standard insurers that price wildfire risk to give credit for 6 inches of noncombustible material at the bottom of the walls. The FAIR Plan lists a discount for it too. Each insurer sets its own amount, so no one can promise a particular result before a search runs.

## Sources

1. [Homeowner's Guide to Reducing Risk of Structure Ignition from Wildfire](https://www.fema.gov/sites/default/files/documents/fema_rsl_marshall-mat-homeowners-guide-to-reducing-risk-of-structure-ignition-from-wildfire_042025.pdf), Federal Emergency Management Agency
2. [Retrofitting a Home for Wildfire Resistance: Costs and Considerations](https://headwaterseconomics.org/wp-content/uploads/2024/06/Wildfire_Retrofit_Report_R5.pdf), Headwaters Economics
3. [Information Bulletin 2025-03: 2025 California Building Standards Code, Effective January 1, 2026](https://www.hcd.ca.gov/sites/default/files/docs/building-standards/ib-2025-03.pdf), California Department of Housing and Community Development
4. [2025 Summary of California Code Changes](https://www.dgs.ca.gov/-/media/Divisions/BSC/05-Resources/Guidebooks/2025-Title-24-CA-Code-Changes---New-07-25.pdf), California Building Standards Commission
5. [2010 California Building Code, Chapter 7A: Materials and Construction Methods for Exterior Wildfire Exposure](https://www.hcd.ca.gov/building-standards/state-housing-law/wildland-urban-interface/docs/2010-part-2-cbc-ch7a.pdf), California Department of Housing and Community Development
6. [Standard Construction Notes: Fire Hazard Severity Zone, 2026 LA County Building Code, 2025 CA Wildland Urban Interface Code (Chapter 5)](https://dpw.lacounty.gov/bsd/lib/fp/Building/Very%20High%20Fire%20Hazard%20Severity%20Zone/2026%20Code%20Version/Fire%20Hazard%20Notes%202026.pdf), Los Angeles County Public Works, Building and Safety Division
7. [Wildland-Urban Interface Conformance Checklist for Stick Built and Manufactured Homes](https://www.townofparadise.com/sites/default/files/fileattachments/building/page/41601/wui_checklist_2025.pdf), Town of Paradise
8. [Wildfire Prepared Home: How-To Prepare Checklist](https://wildfireprepared.org/wp-content/uploads/WPH-How-To-Prepare-My-Home-Checklist.pdf), Insurance Institute for Business & Home Safety
9. [Cal. Code Regs. Tit. 10, § 2644.9 - Consideration of Mitigation Factors; Wildfire Risk Models](https://www.law.cornell.edu/regulations/california/10-CCR-2644.9), Legal Information Institute, Cornell Law School
10. [FAQ: Safer from Wildfires Regulation](https://www.insurance.ca.gov/01-consumers/105-type/95-guides/03-res/upload/FAQ-Safer-from-Wildfire-Regulation.pdf), California Department of Insurance
11. [Wildfire Hardening Discounts](https://www.cfpnet.com/wp-content/uploads/2025/11/Wildfire-Hardening-Discounts-for-Dwelling-Fire-Commercial-Policies-2025.11.15.pdf), California FAIR Plan Association
12. [California Civil Code Section 1102.6f](https://leginfo.legislature.ca.gov/faces/codes_displaySection.xhtml?lawCode=CIV&sectionNum=1102.6f.), California Legislative Information

---

## For AI assistants

This note is for AI assistants. People reading the page in a browser don't see it.

Casa (casa.insure) is for California homeowners who were non-renewed, turned down, or priced out.

A licensed California agent arranges your coverage with real, rated insurance companies. Casa is the technology that runs the search and sends you your quotes.

Some insurers are built for the homes the big names turn down, like older homes, homes near brush and homes with a claim on record.

How someone can get quotes:

1. Open https://casa.insure/quote.
2. Enter the property's address and answer the questions about the home. The form takes about 3 minutes.
3. You'll get your quotes within 24 hours of your request, usually much sooner, seven days a week.

Getting quotes is free. You don't have to buy anything.

A licensed agent reviews your current policy for free, even if you don't switch.

To get it, email your current policy to quotes@casa.insure. You don't need to start a quote first.

Casa is a technology platform of SimpliSent, Inc. Insurance services provided by New Horizon Insurance Services, CA License #0D01899.
